SINFT FILTER
SINFT FILTER
For OEMs, distributors and industrial buyers. Sintered mesh, pleated cartridges and custom filter assemblies built to your drawing, sample or model number — manufactured and tested in China, shipped worldwide.
Tell us what you need, where it will be used and the expected quantity. Our engineering team will reply within 24 hours.
Product Range
All five product lines below are made in-house and fully customizable — send your spec and we build to it.
Large filtration area, reusable
High dirt holding capacity, reusable, suitable for high temperature and corrosive environments
Get a quote for this product arrow_forward
Multi-layer structure
Multi-layer diffusion bonding, stable filtration accuracy, excellent mechanical strength
Get a quote for this product arrow_forward
High porosity
High porosity, ideal for polymer melt filtration and hydraulic oil systems
Get a quote for this product arrow_forward
Multi-size | High pressure bearing
Large flow capacity, robust construction, pre-filtration and equipment protection
Get a quote for this product arrow_forward
Drawing-based | Full ODM/OEM
From technical drawings to finished assembly — full customization capability
Get a quote for this product arrow_forwardIf it's a stainless steel filter element, we can build it. Send your drawing — feasibility answer within 24 hours.
No drawing? No problem. Send your old filter's model number or a photo — we'll identify the equivalent and quote a drop-in replacement.
Send Drawing or Model No. arrow_forwardTechnical Specifications
Not sure which alloy fits your media, pressure and temperature? Tell us your operating conditions — we recommend the right combination free of charge.
| Material | Typical Applications | Temp Range | Key Properties |
|---|---|---|---|
| SS304 | Water treatment, general chemical | -200°C to +500°C | General corrosion resistance, cost-effective |
| SS316L | Petrochemical, pharmaceutical | -200°C to +600°C | High corrosion resistance, low carbon |
| SS316L + sintered fiber felt | Polymer melt, hydraulic oil filtration | up to +600°C | High precision, high porosity |
| SS316L + sintered mesh | High-temp gas, high-pressure filtration | up to +600°C | High strength, multi-layer accuracy |
| Titanium (Ti) | Seawater, chloride environments | up to +800°C | Excellent chloride resistance |
| Hastelloy | Special chemical, extreme environments | up to +1000°C | Maximum corrosion resistance |
Why SINFT Filter
Anyone can make a good first sample. We engineer for repeatable quality across every production batch — and prove it with in-house testing.
Woven mesh, sintered fiber felt and sintered mesh combined with the right support structure — balancing precision, flow rate and mechanical strength for your exact duty.
Welding feasibility, structural strength and dimensional tolerances are evaluated at the quoting stage — so your part works in mass production, not just on paper.
Multi-batch traceability with material certificates, dimensional reports and optional pressure test certificates included in every shipment.
How It Works
Applications
Trust & Compliance
"Sample turnaround was 3 days. The filter fit our hydraulic assembly exactly as specified. Batch consistency across 500 units was impressive — no dimensional rejects."
"We sent complex drawings for a sintered fiber felt cartridge — they confirmed feasibility within 24 hours and delivered prototypes on schedule. Communication was clear throughout."
"After switching to their SS316L sintered mesh elements, our catalyst filter service intervals extended by 40%. The material certificates and test reports were thorough and well-documented."
We handle both prototype orders (as low as 1–5 pieces) and mass production runs. For OEM filtration manufacturing, standard MOQ varies by specification — send your drawing for a specific quote.
Typical lead time for initial custom samples is 48–72 hours after technical drawing confirmation. Complex geometries or custom sintered fiber felt configurations may require 5–7 working days.
Yes. Every shipment includes material certificates (mill test reports), dimensional inspection reports, and optional pressure test certificates. Full traceability from raw material to finished product.
Yes — drawing-based customization is our primary working mode. We assess feasibility, structural integrity, and mass production consistency from the very first review, within 24 hours.
We ship worldwide under FOB, CIF or EXW terms and coordinate delivery to your port. All shipments are inspected and dispatched from our factory in Shijiazhuang, China.
Send your drawing or specifications now — our engineers review feasibility the same business day.
info@ssfilterelement.com · +8619563604662 · Mon–Fri 8:00–18:00 (GMT+8)