
Stainless Steel Pleated Filter Cartridges for Oil & Gas Industry
Purpose-built 316L & 904L pleated filter cartridges for high-pressure, corrosive and continuous-duty service across natural gas, LNG, offshore and crude oil systems.

Industry Characteristics
Why Oil & Gas Demands Stainless Steel Pleated Filtration
Oil & gas operations run under some of the harshest filtration conditions in industry — sustained high pressure, aggressive media, and 24×7×365 uptime requirements. Unplanned shutdowns can cost six- to seven-figure losses per day. The filter cartridge is rarely the most expensive component, but it protects everything that is.
High Pressure
10–300 bar continuous service across natural gas, water injection and offshore hydraulics.
High Flow
500–10,000 Nm³/h gas duty. Pleated geometry provides 3–8× the area of standard cylinders.
Corrosive Media
H₂S, CO₂, amine, salt spray — 316L and 904L resist pitting and stress corrosion.
24×7×365 Uptime
Long-life construction reduces change-out frequency and unplanned shutdowns.
High-Value Equipment
Compressors and turbines cost orders of magnitude more than the filter protecting them.
Costly Downtime
Offshore and refinery stoppages cost USD $100K–$1M+ per day — filter reliability is loss-prevention.
Application Coverage
10 Typical Oil & Gas Applications — Equipment, Conditions & Recommended Cartridge
Each application below comes with its own combination of pressure, media and contaminant profile. The right cartridge structure — woven mesh, sintered mesh, or reinforced — depends on which factor dominates.
← Scroll horizontally to view all columns →
| Application Equipment | Install Location | Protected Equipment | Working Conditions | Contaminants | Customer Pain Point | Consequence Without Filter | Recommended Cartridge |
|---|---|---|---|---|---|---|---|
| Gas Filter Separator | Upstream of compressor inlet | Gas compressor, control valves | 20–150 bar; 500–10,000 Nm³/h | Rust, weld slag, pipeline scale, dust, liquid droplets | Compressor impeller wear | Compressor failure, unplanned shutdown | 316L Sintered Mesh Pleated |
| Gas Gathering Station Filtration | Pipeline filter | Regulators, flow meters | Continuous duty; high flow | Rust, sand, weld slag | Valve wear | Instrument failure | 316L Woven Mesh Pleated |
| LNG Liquefaction Unit | Cold-box pre-filter | Heat exchangers, cryogenic valves | Cryogenic; high-purity requirement | Metal particles, scale | Heat exchanger blockage | Reduced heat-transfer efficiency | 316L Sintered Mesh Pleated |
| Offshore Platform Hydraulic System | High-pressure hydraulic line | Hydraulic pumps, valve banks | 100–350 bar | Metal wear particles, sea-salt | Hydraulic system failure | Platform shutdown | 316L Sintered Mesh Pleated |
| Offshore Mud Circulation System | Mud circulation filter | Mud pumps, nozzles | High-solids medium | Cuttings, sand, metal particles | Mud pump wear | Reduced drilling efficiency | 316L Reinforced Pleated |
| Water Injection System | Upstream of HP injection pump | Injection pumps, wellhead valves | 50–250 bar | Silt, rust, bacterial clusters | Injection pump wear | Wellbore plugging | 316L Sintered Mesh Pleated |
| Crude Oil Pipeline System | In-line pipeline filter | Transfer pumps | High continuous flow | Rust, weld slag, wax particles | Severe pump wear | Reduced throughput | 316L Woven Mesh Pleated |
| Crude Storage Tank Circulation | Recirculation filter | Transfer pumps | Long-term continuous duty | Oil sludge, rust, sediment | Short cartridge life | Degraded product quality | 316L Sintered Mesh Pleated |
| Gas Turbine Fuel Gas System | Fuel gas filter | Turbine fuel nozzles | High-purity requirement | Rust, dust, liquid droplets | Nozzle plugging | Reduced combustion efficiency | High-Precision 316L Sintered |
| Amine Circulation System | Amine filter loop | Amine pumps, heat exchangers | Corrosive medium (H₂S, CO₂) | Corrosion products, FeS particles | Amine foaming | Heat exchanger blockage | 316L / 904L Pleated |
Operating Conditions
Why Stainless Steel Pleated — Mapped to Oil & Gas Conditions
| Condition Type | Working Conditions | Why Stainless Steel Pleated Filter |
|---|---|---|
| High-Pressure Gas | 20–150 bar | All-metal pleated structure resists deformation under sustained high pressure. |
| Offshore Environment | High salt spray, high humidity | 316L offers excellent corrosion resistance to marine atmospheres. |
| High-Flow Gas Transport | 1,000–10,000 Nm³/h | Pleated geometry yields 3–8× larger effective filtration area. |
| Continuous Duty | 24h × 365d | Long-life construction minimizes unplanned change-out and downtime. |
| Corrosive Media | H₂S, CO₂ environments | 316L (and 904L for severe service) resist pitting and stress corrosion. |
| High-Temperature Gas | 80–250 °C | Metal media remain stable where polymer media fail. |
| Water Injection | High-pressure, sand-laden water | Reinforced 316L offers superior abrasion resistance. |
| LNG / Cryogenic | −50 °C to −196 °C | Stainless steel maintains excellent toughness at cryogenic temperatures. |
Customer Concerns
Top 5 Questions from Oil & Gas Customers
1. Why do our compressors keep getting damaged?
add
In oil & gas service, rust, weld slag, pipeline scale and entrained liquid droplets reach compressor impellers and cause wear, vibration and unplanned shutdowns. SINFT 316L pleated cartridges installed upstream of the compressor remove both solid particulates and droplets, extending compressor MTBF and eliminating particulate-driven failures.
2. Why is our current filter cartridge life so short?
add
Cylindrical surface filters have very limited filtration area. SINFT pleated cartridges provide 3–8× more effective filtration area in the same housing footprint, dramatically increasing dirt-holding capacity and service life between change-outs.
3. Pressure drop rises too fast — what can we do?
add
High-rate dP rise usually means undersized dirt-holding capacity or the wrong micron rating. Our pleated 316L cartridges combine high pleat density with optimized open-area mesh layers — they hold significantly more contaminant before reaching terminal differential pressure.
4. Can these cartridges withstand high pressure?
add
Yes. SINFT pleated cartridges are all-metal construction (316L core, mesh and end caps), validated for service from 10 bar up to 300 bar depending on configuration. Reinforced versions are available for offshore drilling and water injection duty.
5. Offshore replacement is difficult — any options to extend life?
add
Yes — SINFT pleated cartridges are cleanable and reusable. They can be regenerated by backwashing, ultrasonic cleaning or chemical cleaning, reducing offshore change-out frequency and minimizing helicopter and supply-vessel logistics costs.
Related Products & Applications
Explore Related Solutions
Pleated Filter Cartridges
Back to the full product overview, specs and downloads.
Sintered Mesh Filter
For high-pressure, high-temperature gas duty.
Basket Filters & Strainers
Large-flow inline strainers for pipeline service.
Petrochemical Applications
Downstream chemicals, solvents and catalyst recovery.
Request a Quote — Oil & Gas Pleated Filtration
Tell us your application, pressure, flow rate and media — our engineering team replies with a tailored cartridge specification within 24 hours.