Sintered Fiber Felt for Steel & Metallurgy Industry

Inconel and 316L sintered metal fiber felt used in steel mill BF gas TRT and hydraulic depth filtration
Sintered Fiber Felt · Steel & Metallurgy

Sintered Fiber Felt for Steel & Metallurgy Industry

Integrated depth-filtration coverage for the full steel mill — 316L for hydraulic and lube oil polishing, Inconel for BF gas and TRT protection, 310S for sinter dedusting, FeCrAl for aluminum melt, Hastelloy for nickel smelting.

1–25 µm Up to 900 °C (FeCrAl) 316L / Inconel / 310S / 904L FeCrAl / Hastelloy C-276 20 Mill Applications

Industry Characteristics

Why Steel & Metallurgy Specifies Sintered Fiber Felt Across Multiple Grades

Integrated steel mills demand the broadest range of filtration in heavy industry — from NAS 5 hydraulic oil polishing on cold rolling AGC systems, to 800 °C BF gas dedusting ahead of TRT generators, to 900 °C molten aluminum casting. No single material handles all of these. SINFT’s full sintered fiber felt material range — 316L, Inconel 600, 310S, FeCrAl, 904L, Hastelloy — delivers depth filtration across every mill system, from raw materials to finished surface treatment.

local_fire_department

Up to 900 °C

316L 480 °C · 904L 400 °C · 310S 700 °C · Inconel 800 °C · FeCrAl 900 °C — full spectrum.

precision_manufacturing

Hydraulic NAS 5 Polishing

3–10 µm depth filtration for AGC systems & servo valve cleanliness.

bolt

TRT Protection

Inconel felt captures iron-oxide and coke fines before turbine blades.

science

Aggressive Acid & Smelting

904L for pickling, Hastelloy for nickel/copper smelting chemistry.

layers

FeCrAl for Aluminum Melt

650–750 °C molten aluminum with permanent 5–10 µm rating.

handyman

Multi-Layer Composite

Felt + sintered mesh + perforated skeleton + Viton seal — engineered for mill duty.

Application Coverage

20 Mill Applications — Equipment, Conditions, Material & Rating

From hot rolling and cold rolling hydraulic and lubrication, to continuous casting cooling water and segment lubrication, to blast furnace TRT, BOF, sinter plant and coking gas systems, pickling, electroplating, aluminum casting, copper and nickel smelting — the full integrated mill in one matrix.

← Scroll horizontally to view all columns →

Application SystemEquipmentService MediumWorking ConditionsContaminantsCustomer Pain PointRatingMaterial
Hot Rolling LubricationWork-roll Bearing Lube StationLube oil60–90 °C, 24×7Iron / copper powder, scaleShort bearing life10 µm316L
Cold Rolling AGC HydraulicsAGC Hydraulic SystemHydraulic oil150–350 barMetal wear, oxides, sludgeServo valve seizure3–10 µm316L Multi-Layer
CC Secondary Cooling WaterSlab CasterRecirculating cooling waterAmbient – 80 °CMill scale, scale, siltSpray nozzle plugging25–50 µm316L
Blast Furnace Gas / TRTTRT Inlet FilterBF gas100–350 °CCoke fines, iron-oxide dustTRT blade wear3–5 µmInconel 600
Converter (BOF) GasBOF Flue Gas CleaningBOF gas150–450 °CIron-oxide dust, metal finesDust exceedance5 µmInconel
Sinter Plant DedustingSinter Flue GasFlue gas120–300 °CSinter dust, iron powderID fan impeller wear10 µm310S
Coking Tar SystemTar Transfer LineCoal tar100–250 °CCoke fines, charPipeline plugging5 µm316L
Pickling LineAcid RecirculationHCl / H₂SO₄40–90 °CMill scale, iron ionsShort acid life5 µm904L
Electroplating LinePlating Bath CirculationPlating solution30–80 °CMetal particles, precipitatesPlating pin-holes1–5 µmElectropolished 316L
Aluminum Melt FiltrationPre-Casting FilterMolten aluminum650–750 °CAlumina inclusions, drossAluminum sheet pin-holes5–10 µmFeCrAl
Copper SmeltingElectrolyte SystemElectrolyte50–90 °CCopper powder, oxidesLower electrolysis efficiency1–5 µm316L
Nickel SmeltingAcid Leach SystemAcid leach liquor60–120 °CNickel oxides, slagSevere pump wear5 µmHastelloy C-276
Steelmaking Hydraulic StationHydraulic Power UnitHydraulic oil50–80 °CMetal wear particlesHydraulic valve fault5 µm316L Multi-Layer
CC Segment LubricationSegment Bearing LubeGrease / lube oilHigh-dust environmentIron powder, mill scaleShort bearing life10 µm316L
Industrial Cooling WaterCooling Tower SystemRecirculating waterHigh-flow continuousRust, scale, siltHeat exchanger plugging25 µm316L
Cold Rolling EmulsionEmulsion StationRolling emulsionHigh flowMetal fines, sludgePlate-surface scratches5 µm316L Depth
TRT LubricationTRT Turbine LubeLube oilHigh-speed rotatingFine metal particlesBearing wear3 µm316L High-Precision
BF Coal InjectionPneumatic ConveyingCompressed air / coal dustHigh-dust serviceCoal-dust particlesLance plugging5 µmInconel Wear-Resistant
Oxygen PlantOxygen GenerationOxygenHigh-cleanliness requirementRust, particulatesEquipment contamination1 µmElectropolished 316L
BF Cooling SystemCooling Water SystemIndustrial waterHigh recirculationMill scale, scaleCooling circuit plugging25 µm316L

Material Selection

Material Selection & Temperature Rating Guide

Service-driven material selection with long-term temperature rating per ASTM creep / oxidation data. Used as the starting reference; we tailor per fluid analysis & mill operating envelope.

Service EnvironmentRecommended MaterialLong-Term TemperaturePrimary Application
Lube oil filtration316L Sintered Felt480 °CRolling mill, TRT, reducer.
Hydraulic oil filtration316L Sintered Felt480 °CAGC system, hydraulic station.
High-temp gas filtrationInconel 600 Sintered Felt800 °CBlast furnace gas, TRT.
Flue gas filtration310S Sintered Felt700 °CSinter plant, BOF.
Molten aluminum filtrationFeCrAl Sintered Felt900 °CAluminum casting system.
Pickling acid filtration904L Sintered Felt400 °CPickling line.
Strongly acidic mediumHastelloy C-276 Sintered Felt450 °CNickel / copper smelting.
Plating solutionElectropolished 316L Sintered Felt480 °CElectroplating system.

Customer Concerns

Top 5 Questions from Steel & Metallurgy Customers

1. Why is sintered fiber felt the preferred depth filter in steel & metallurgy?

add

Steel mills combine high temperature (up to 900 °C molten aluminum, 800 °C blast furnace gas), aggressive contaminant loading (mill scale, coke dust, iron oxide), sustained continuous service, and very high cost of unplanned shutdown. Sintered metal fiber felt’s 3D depth structure captures contaminants progressively — delivering 5–10× more dirt-holding than surface media, with all-metal construction that survives where ceramic or polymer media fail. From hydraulic oil polishing at NAS 5 to 800 °C BF gas dedusting, sintered fiber felt is the unifying solution.

2. What material grade for blast furnace gas and TRT power generation?

add

For TRT (Top-pressure Recovery Turbine) inlet protection on BF gas at 100–350 °C, SINFT Inconel 600 sintered fiber felt is the field-proven standard — rated for sustained service to 800 °C, captures coke fines and iron-oxide dust before they reach turbine blades. The 3–5 µm rating protects multi-million-dollar TRT generation assets. For converter (BOF) gas at 150–450 °C, Inconel felt is also recommended; for sinter plant dedusting, 310S felt at 700 °C max.

3. How does SINFT sintered fiber felt protect rolling mill AGC hydraulic systems?

add

Cold rolling AGC (Automatic Gauge Control) hydraulic systems at 150–350 bar demand NAS 5 or better cleanliness to keep servo and proportional valves responsive. SINFT 316L multi-layer gradient sintered fiber felt at 3–10 µm depth filtration is the field-proven choice — captures wear particles, oxides and sludge, delivers stable cleanliness across years of continuous service. Typically deployed downstream of pleated bulk filter for final polishing.

4. Can sintered fiber felt handle aluminum melt filtration at 750 °C?

add

Yes — aluminum casting requires permanent micron filtration of molten aluminum at 650–750 °C to remove alumina inclusions and dross. SINFT FeCrAl (iron-chromium-aluminum) sintered fiber felt is rated for sustained service to 900 °C, captures sub-10 µm inclusions, and dramatically improves aluminum sheet quality by eliminating pinhole defects. Standard on Al-Mg-Si alloy casting lines.

5. What about acid pickling and non-ferrous smelting service?

add

For pickling line acid (HCl, H₂SO₄) at 40–90 °C, SINFT 904L sintered fiber felt resists acid corrosion. For copper smelting electrolyte at 50–90 °C, electropolished 316L delivers ultra-pure cathode copper. For nickel smelting acid leaching at 60–120 °C with sulfide-bearing chemistry, Hastelloy C-276 sintered fiber felt is the standard — resists severe corrosion and sulfide stress cracking.

Related Products & Applications

Explore Related Solutions

Request a Quote — Steel & Metallurgy Sintered Fiber Felt

Tell us your mill system (TRT / BOF / sinter / coking / AGC hydraulic / aluminum casting / Cu-Ni smelting…), fluid & temperature, target cleanliness class and operating pressure — our engineering team replies with a tailored specification within 24 hours.