
SINFT Filter Blog
Guides, know-how, and fundamentals — written by engineers for engineers working with stainless steel filters and custom filtration solutions.

Compare surface filtration vs depth filtration by capture mechanism, dirt loading, pressure drop, cleaning method and stainless steel filter media selection.

Filter pressure drop vs flow rate: read curves, compare clean and loaded DP, and send the right data for industrial filter sizing.

Use this filter micron rating chart to compare microns, mesh, nominal and absolute ratings, media ranges, pressure drop, and RFQ requirements.

Basket strainer vs Y strainer: compare debris load, pressure drop, cleaning access, installation space, and custom basket RFQ data.
Quick answers to the questions we get most from engineers and procurement teams.
Sintered mesh filters are made from multiple layers of stainless steel wire mesh sintered together, offering high strength and temperatures up to 400°C. Pleated filter cartridges use pleated media to increase surface area, ideal for higher flow rates with lower pressure drops. Choose sintered mesh for high-pressure and high-temperature applications; pleated cartridges for general industrial filtration.
25–100 μm for coarse pre-filtration, 5–25 μm for fine filtration, 1–5 μm for precision polishing. Provide your application details (media type, flow rate, pressure conditions) and our team will recommend the appropriate rating.
Yes. Backwash with compressed air or compatible liquid. Avoid harsh chemicals that damage seal materials. Inspect the media after each cleaning cycle. Replace if any deformation, media thinning, or seal wear is detected.
Passivation removes free iron from the stainless steel surface via electrochemical treatment, improving corrosion resistance. Every SINFT Filter filter undergoes passivation testing before shipping — verified with up to 200 tests per kit.
Initial samples typically delivered within 48–72 hours after drawing confirmation. Prototype quantities as low as 1–5 pieces accepted. Share your technical drawings via email and our team will confirm the timeline.