
SINFT Filter Blog
Guides, know-how, and fundamentals — written by engineers for engineers working with stainless steel filters and custom filtration solutions.

Learn what a bubble point test for filter element inspection confirms, what it cannot prove, and what RFQ data buyers should send.

Compare SS304 vs SS316L filter element materials by corrosion risk, chlorides, cleaning, welding, applications and RFQ data.

Compare basket strainer mesh vs perforated basket designs by particle retention, open area, pressure drop, strength, cleaning and RFQ data.

Compare reusable vs disposable filter cartridge options by cleaning, pressure drop, material compatibility, lifecycle cost and RFQ data.

Compare wedge wire vs perforated plate by slot geometry, open area, strength, pressure drop, cleaning, applications and RFQ data.

Compare sintered fiber felt vs sintered mesh by filtration mechanism, porosity, pressure drop, strength, cleaning, applications and RFQ data.

Compare wedge wire vs notch wire filter structures by slot shape, cleaning method, flow direction, viscosity, application fit and RFQ data.

Choose wedge wire screen slot size by particle target, V-slot geometry, open area, pressure drop, cleaning method, flow direction and RFQ data.

Learn how a backwash filter works, including filtration, differential pressure trigger, reverse-flow cleaning, drain discharge, media selection and RFQ data.

Learn how sintered fiber felt porosity affects permeability, pressure drop, dirt holding, micron rating, support design, cleaning and RFQ data.
Quick answers to the questions we get most from engineers and procurement teams.
Sintered mesh filters are made from multiple layers of stainless steel wire mesh sintered together, offering high strength and temperatures up to 400°C. Pleated filter cartridges use pleated media to increase surface area, ideal for higher flow rates with lower pressure drops. Choose sintered mesh for high-pressure and high-temperature applications; pleated cartridges for general industrial filtration.
25–100 μm for coarse pre-filtration, 5–25 μm for fine filtration, 1–5 μm for precision polishing. Provide your application details (media type, flow rate, pressure conditions) and our team will recommend the appropriate rating.
Yes. Backwash with compressed air or compatible liquid. Avoid harsh chemicals that damage seal materials. Inspect the media after each cleaning cycle. Replace if any deformation, media thinning, or seal wear is detected.
Passivation removes free iron from the stainless steel surface via electrochemical treatment, improving corrosion resistance. Every SINFT Filter filter undergoes passivation testing before shipping — verified with up to 200 tests per kit.
Initial samples typically delivered within 48–72 hours after drawing confirmation. Prototype quantities as low as 1–5 pieces accepted. Share your technical drawings via email and our team will confirm the timeline.