
Sintered Fiber Felt for Steel & Metallurgy Industry
Integrated depth-filtration coverage for the full steel mill — 316L for hydraulic and lube oil polishing, Inconel for BF gas and TRT protection, 310S for sinter dedusting, FeCrAl for aluminum melt, Hastelloy for nickel smelting.

Industry Characteristics
Why Steel & Metallurgy Specifies Sintered Fiber Felt Across Multiple Grades
Integrated steel mills demand the broadest range of filtration in heavy industry — from NAS 5 hydraulic oil polishing on cold rolling AGC systems, to 800 °C BF gas dedusting ahead of TRT generators, to 900 °C molten aluminum casting. No single material handles all of these. SINFT’s full sintered fiber felt material range — 316L, Inconel 600, 310S, FeCrAl, 904L, Hastelloy — delivers depth filtration across every mill system, from raw materials to finished surface treatment.
Up to 900 °C
316L 480 °C · 904L 400 °C · 310S 700 °C · Inconel 800 °C · FeCrAl 900 °C — full spectrum.
Hydraulic NAS 5 Polishing
3–10 µm depth filtration for AGC systems & servo valve cleanliness.
TRT Protection
Inconel felt captures iron-oxide and coke fines before turbine blades.
Aggressive Acid & Smelting
904L for pickling, Hastelloy for nickel/copper smelting chemistry.
FeCrAl for Aluminum Melt
650–750 °C molten aluminum with permanent 5–10 µm rating.
Multi-Layer Composite
Felt + sintered mesh + perforated skeleton + Viton seal — engineered for mill duty.
Application Coverage
20 Mill Applications — Equipment, Conditions, Material & Rating
From hot rolling and cold rolling hydraulic and lubrication, to continuous casting cooling water and segment lubrication, to blast furnace TRT, BOF, sinter plant and coking gas systems, pickling, electroplating, aluminum casting, copper and nickel smelting — the full integrated mill in one matrix.
← Scroll horizontally to view all columns →
| Application System | Equipment | Service Medium | Working Conditions | Contaminants | Customer Pain Point | Rating | Material |
|---|---|---|---|---|---|---|---|
| Hot Rolling Lubrication | Work-roll Bearing Lube Station | Lube oil | 60–90 °C, 24×7 | Iron / copper powder, scale | Short bearing life | 10 µm | 316L |
| Cold Rolling AGC Hydraulics | AGC Hydraulic System | Hydraulic oil | 150–350 bar | Metal wear, oxides, sludge | Servo valve seizure | 3–10 µm | 316L Multi-Layer |
| CC Secondary Cooling Water | Slab Caster | Recirculating cooling water | Ambient – 80 °C | Mill scale, scale, silt | Spray nozzle plugging | 25–50 µm | 316L |
| Blast Furnace Gas / TRT | TRT Inlet Filter | BF gas | 100–350 °C | Coke fines, iron-oxide dust | TRT blade wear | 3–5 µm | Inconel 600 |
| Converter (BOF) Gas | BOF Flue Gas Cleaning | BOF gas | 150–450 °C | Iron-oxide dust, metal fines | Dust exceedance | 5 µm | Inconel |
| Sinter Plant Dedusting | Sinter Flue Gas | Flue gas | 120–300 °C | Sinter dust, iron powder | ID fan impeller wear | 10 µm | 310S |
| Coking Tar System | Tar Transfer Line | Coal tar | 100–250 °C | Coke fines, char | Pipeline plugging | 5 µm | 316L |
| Pickling Line | Acid Recirculation | HCl / H₂SO₄ | 40–90 °C | Mill scale, iron ions | Short acid life | 5 µm | 904L |
| Electroplating Line | Plating Bath Circulation | Plating solution | 30–80 °C | Metal particles, precipitates | Plating pin-holes | 1–5 µm | Electropolished 316L |
| Aluminum Melt Filtration | Pre-Casting Filter | Molten aluminum | 650–750 °C | Alumina inclusions, dross | Aluminum sheet pin-holes | 5–10 µm | FeCrAl |
| Copper Smelting | Electrolyte System | Electrolyte | 50–90 °C | Copper powder, oxides | Lower electrolysis efficiency | 1–5 µm | 316L |
| Nickel Smelting | Acid Leach System | Acid leach liquor | 60–120 °C | Nickel oxides, slag | Severe pump wear | 5 µm | Hastelloy C-276 |
| Steelmaking Hydraulic Station | Hydraulic Power Unit | Hydraulic oil | 50–80 °C | Metal wear particles | Hydraulic valve fault | 5 µm | 316L Multi-Layer |
| CC Segment Lubrication | Segment Bearing Lube | Grease / lube oil | High-dust environment | Iron powder, mill scale | Short bearing life | 10 µm | 316L |
| Industrial Cooling Water | Cooling Tower System | Recirculating water | High-flow continuous | Rust, scale, silt | Heat exchanger plugging | 25 µm | 316L |
| Cold Rolling Emulsion | Emulsion Station | Rolling emulsion | High flow | Metal fines, sludge | Plate-surface scratches | 5 µm | 316L Depth |
| TRT Lubrication | TRT Turbine Lube | Lube oil | High-speed rotating | Fine metal particles | Bearing wear | 3 µm | 316L High-Precision |
| BF Coal Injection | Pneumatic Conveying | Compressed air / coal dust | High-dust service | Coal-dust particles | Lance plugging | 5 µm | Inconel Wear-Resistant |
| Oxygen Plant | Oxygen Generation | Oxygen | High-cleanliness requirement | Rust, particulates | Equipment contamination | 1 µm | Electropolished 316L |
| BF Cooling System | Cooling Water System | Industrial water | High recirculation | Mill scale, scale | Cooling circuit plugging | 25 µm | 316L |
Material Selection
Material Selection & Temperature Rating Guide
Service-driven material selection with long-term temperature rating per ASTM creep / oxidation data. Used as the starting reference; we tailor per fluid analysis & mill operating envelope.
| Service Environment | Recommended Material | Long-Term Temperature | Primary Application |
|---|---|---|---|
| Lube oil filtration | 316L Sintered Felt | 480 °C | Rolling mill, TRT, reducer. |
| Hydraulic oil filtration | 316L Sintered Felt | 480 °C | AGC system, hydraulic station. |
| High-temp gas filtration | Inconel 600 Sintered Felt | 800 °C | Blast furnace gas, TRT. |
| Flue gas filtration | 310S Sintered Felt | 700 °C | Sinter plant, BOF. |
| Molten aluminum filtration | FeCrAl Sintered Felt | 900 °C | Aluminum casting system. |
| Pickling acid filtration | 904L Sintered Felt | 400 °C | Pickling line. |
| Strongly acidic medium | Hastelloy C-276 Sintered Felt | 450 °C | Nickel / copper smelting. |
| Plating solution | Electropolished 316L Sintered Felt | 480 °C | Electroplating system. |
Customer Concerns
Top 5 Questions from Steel & Metallurgy Customers
1. Why is sintered fiber felt the preferred depth filter in steel & metallurgy?
add
Steel mills combine high temperature (up to 900 °C molten aluminum, 800 °C blast furnace gas), aggressive contaminant loading (mill scale, coke dust, iron oxide), sustained continuous service, and very high cost of unplanned shutdown. Sintered metal fiber felt’s 3D depth structure captures contaminants progressively — delivering 5–10× more dirt-holding than surface media, with all-metal construction that survives where ceramic or polymer media fail. From hydraulic oil polishing at NAS 5 to 800 °C BF gas dedusting, sintered fiber felt is the unifying solution.
2. What material grade for blast furnace gas and TRT power generation?
add
For TRT (Top-pressure Recovery Turbine) inlet protection on BF gas at 100–350 °C, SINFT Inconel 600 sintered fiber felt is the field-proven standard — rated for sustained service to 800 °C, captures coke fines and iron-oxide dust before they reach turbine blades. The 3–5 µm rating protects multi-million-dollar TRT generation assets. For converter (BOF) gas at 150–450 °C, Inconel felt is also recommended; for sinter plant dedusting, 310S felt at 700 °C max.
3. How does SINFT sintered fiber felt protect rolling mill AGC hydraulic systems?
add
Cold rolling AGC (Automatic Gauge Control) hydraulic systems at 150–350 bar demand NAS 5 or better cleanliness to keep servo and proportional valves responsive. SINFT 316L multi-layer gradient sintered fiber felt at 3–10 µm depth filtration is the field-proven choice — captures wear particles, oxides and sludge, delivers stable cleanliness across years of continuous service. Typically deployed downstream of pleated bulk filter for final polishing.
4. Can sintered fiber felt handle aluminum melt filtration at 750 °C?
add
Yes — aluminum casting requires permanent micron filtration of molten aluminum at 650–750 °C to remove alumina inclusions and dross. SINFT FeCrAl (iron-chromium-aluminum) sintered fiber felt is rated for sustained service to 900 °C, captures sub-10 µm inclusions, and dramatically improves aluminum sheet quality by eliminating pinhole defects. Standard on Al-Mg-Si alloy casting lines.
5. What about acid pickling and non-ferrous smelting service?
add
For pickling line acid (HCl, H₂SO₄) at 40–90 °C, SINFT 904L sintered fiber felt resists acid corrosion. For copper smelting electrolyte at 50–90 °C, electropolished 316L delivers ultra-pure cathode copper. For nickel smelting acid leaching at 60–120 °C with sulfide-bearing chemistry, Hastelloy C-276 sintered fiber felt is the standard — resists severe corrosion and sulfide stress cracking.
Related Products & Applications
Explore Related Solutions
Sintered Fiber Felt
Back to the full product overview, specs and downloads.
Pleated · Steel & Metallurgy
EH oil, hydraulic & rolling-mill bulk filtration.
Basket & Tube · Steel & Metallurgy
Mill scale, descaling, BF gas large-flow coarse filtration.
Sintered Mesh · Hydraulic
Servo valve protection & ISO 4406 service.
Request a Quote — Steel & Metallurgy Sintered Fiber Felt
Tell us your mill system (TRT / BOF / sinter / coking / AGC hydraulic / aluminum casting / Cu-Ni smelting…), fluid & temperature, target cleanliness class and operating pressure — our engineering team replies with a tailored specification within 24 hours.