
Stainless Steel Pleated Filter Cartridges for Steel & Metallurgy Industry
High-pressure, high-temperature 316L / 904L / 310S pleated filter cartridges purpose-built for continuous casting, rolling mill hydraulics, blast furnace, EAF, sinter plant, pickling and galvanizing service.

Industry Characteristics
Why Steel & Metallurgy Demands Reinforced Stainless Pleated Filtration
Steel mill hydraulics see some of the most demanding service in industry: pressures up to 420 bar, sustained pulse loading, high-temperature gases up to 600 °C, dense mill-scale and iron-oxide contamination, and 24×7 production where every minute of downtime costs thousands.
Wide Temperature Range
50–600 °C across rolling mill hydraulics, blast furnace gas, sinter plant flue gas, secondary cooling water.
High-Pressure Hydraulics
100–420 bar continuous service with frequent pulse loading on AGC valves and accumulator-driven systems.
Heavy Metal Particle Load
Wear particles from pumps, gearboxes and bearings circulate continuously through fluid systems.
Mill Scale Contamination
Iron-oxide mill scale is unavoidable in hot rolling and continuous casting — high-capacity filters are mandatory.
Continuous Operation
Integrated steel mills run 24×7×365. Long-life filters are essential to minimize change-outs.
Costly Downtime
Hot strip mill or BF stoppages cost USD $100K–$500K+ per hour — filtration is loss-prevention.
Application Coverage
12 Typical Steel & Metallurgy Applications — Equipment, Conditions & Recommended Cartridge
From continuous casting and rolling-mill hydraulics, to blast furnace gas cleaning, EAF electrode systems, sinter plant flue gas and stainless-grade pickling — each unit has a distinct combination of pressure, temperature, contaminant and corrosion profile.
← Scroll horizontally to view all columns →
| Application Equipment | Install Location | Protected Equipment | Working Conditions | Contaminants | Customer Pain Point | Consequence Without Filter | Recommended Cartridge |
|---|---|---|---|---|---|---|---|
| Continuous Casting Hydraulics | Pressure & return lines on hydraulic station | Hydraulic pumps, proportional valves, servo valves | 160–350 bar; continuous | Metal wear particles, mill scale, sludge | Valve seizure, system faults | Hydraulic failure, caster shutdown | 316L Sintered Mesh Pleated |
| Hot Rolling Mill Hydraulics | Main hydraulic station filter | HP pumps, AGC control valves | 200–420 bar; high pulse load | Metal particles, weld slag, rust | Short component life | Reduced rolling precision | 5-Layer Sintered Mesh Pleated |
| Cold Rolling Lubrication | Lube oil circulation | Bearings, gearboxes | Oil temp 40–80 °C | Metal powder, sludge | Bearing wear | Bearing seizure / burnout | Sintered Mesh Pleated |
| Blast Furnace Hydraulics | BF hydraulic station | Hydraulic cylinders, valve banks | High-temp, high-dust environment | Iron oxide dust, coal dust | Cartridges plug rapidly | Frequent hydraulic faults | Reinforced Pleated Cartridge |
| Converter Tilting Hydraulics | Tilting hydraulic station | Hydraulic motors, pumps | High-temp vibration environment | Metal particles, mill scale | Tilting failure | Converter shutdown | 316L Sintered Mesh Pleated |
| EAF Electrode Hydraulics | Electrode lift hydraulic system | Electrode control system | High-frequency action duty | Iron powder, sludge | Electrode control failure | Lower steelmaking efficiency | 5-Layer Sintered Mesh Pleated |
| Blast Furnace Coal Injection | Pneumatic conveying filter | Coal valves, injection lances | High-concentration coal transport | Coal dust, metal particles | Valve wear | Reduced injection efficiency | 316L Sintered Mesh Cartridge |
| Sinter Plant Flue Gas | Flue gas cleaning system | ID fans, flue gas valves | 150–450 °C | Flue dust, iron-oxide particles | Fan wear | Emission exceedance | 310S Heat-Resistant Pleated |
| Blast Furnace Gas Cleaning | BF gas filter | Fans, compressors | 80–350 °C | Coke fines, iron-oxide dust | Fan impeller wear | Fan failure | Sintered Mesh Pleated |
| CC Secondary Cooling Water | Cooling water filter | Spray nozzle system | Recirculating water duty | Mill scale, silt | Nozzle plugging | Lower slab quality | 316L Sintered Mesh Pleated |
| Pickling Line Filtration | Acid circulation filter | Spray system, acid pumps | Acidic media; 50–90 °C | Iron-ion deposits, mill scale | Nozzle plugging | Lower pickling quality | 904L Pleated |
| Galvanizing Line Filtration | Plating bath circulation | Circulation pumps, spray nozzles | Corrosive media | Metal oxides | Plating defects | Product downgrade | 316L / 904L Pleated |
Operating Conditions
Why Stainless Steel Pleated — Mapped to Steel Mill Conditions
| Condition Type | Working Conditions | Why Stainless Steel Pleated Filter |
|---|---|---|
| High-Pressure Hydraulics | 160–420 bar | Standard cartridges collapse — all-metal pleated construction handles full pressure. |
| High-Frequency Pulse Load | Continuous pressure spikes | Superior fatigue resistance. |
| High-Dust Environment | Heavy iron-oxide concentration | High dirt-holding capacity per filter element. |
| High Temperature | 150–600 °C | Polymer or resin-bonded media degrade — metal media stay stable. |
| High-Wear Duty | Heavy metal-particle load | Superior abrasion resistance. |
| Continuous Production | 24 h operation | Long-life cartridges between turnarounds. |
| Acidic Media | Pickling acid environment | 904L resists pitting and stress corrosion. |
| Cleanable / Reusable | Scheduled maintenance | Ultrasonic / chemical / backwash cleaning supported. |
Customer Concerns
Top 5 Questions from Steel & Metallurgy Customers
1. Why do our hydraulic valves keep getting damaged?
add
In steel mill hydraulics, metallic wear particles and mill scale circulate through servo and proportional valves, causing spool seizure and rapid valve wear. SINFT 316L pleated cartridges installed in the pressure and return lines remove particles down to single-digit ISO cleanliness codes, extending valve and pump MTBF dramatically.
2. Why is our current cartridge life so short?
add
Conventional cartridges have very limited dirt-holding area. SINFT pleated cartridges provide 3–8× more effective filtration area in the same housing footprint, dramatically increasing service life — especially valuable in dusty steel mill environments.
3. Differential pressure rises too fast — what’s the fix?
add
High-rate dP rise indicates undersized dirt-holding capacity. SINFT high-dirt-holding sintered mesh pleated cartridges combine deep pleat density with optimized open-area structure, dramatically slowing dP rise in high-contaminant streams.
4. Our cartridges deform under high pressure — what construction do you offer?
add
SINFT pleated cartridges are all-metal construction (316L mesh, core and end caps), with reinforced 5-layer sintered mesh versions rated to 420 bar for hot rolling hydraulics, AGC valves and high-pulse impact service.
5. Maintenance downtime cost is too high — any options?
add
SINFT pleated cartridges are cleanable and reusable. Ultrasonic, backwash and chemical cleaning regenerate the filter for multiple service cycles, reducing total cost of ownership and the frequency of line stoppages.
Related Products & Applications
Explore Related Solutions
Pleated Filter Cartridges
Back to the full product overview, specs and downloads.
Sintered Mesh Filter
5-layer reinforced media — the core for high-pressure hydraulics.
Oil & Gas Application
Upstream gas, LNG, offshore and pipeline filtration.
Petrochemical Application
FCC, hydrocracking, ethylene and refinery service.
Request a Quote — Steel & Metallurgy Pleated Filtration
Tell us your equipment (hot rolling, continuous caster, BF, EAF, pickling line…), working pressure, temperature and contaminant — our engineering team replies with a tailored cartridge specification within 24 hours.