
Stainless Steel Pleated Filter Cartridges for Compressed Air & Industrial Gas
316L, electropolished and Hastelloy pleated cartridges for compressed air, instrument air, PSA N₂ / O₂ / H₂, LNG and process gas, semiconductor and sterile fermentation gas — no fiber shedding, no media migration, online pulse-backwash compatible.

Industry Characteristics
Why Gas Service Demands Zero-Migration Stainless Pleated Filtration
Industrial gas service has the highest gas-purity requirements in industry, 24-hour duty, frequent high-temperature service, strict differential-pressure control and zero tolerance for media migration or fiber shedding. A failed cartridge takes the entire production line with it. Most cycles also rely on online pulse-jet backwash — which polymer media simply cannot survive.
Especially critical for: O₂ generation plants, N₂ PSA plants, H₂ generation, instrument air systems, semiconductor gas systems, LNG processing and petrochemical process gas.
Extreme Gas Purity
99.99 % – 99.9999 % product purity demands stable sub-micron filtration without media drift.
24×7 Continuous
Air separation units and PSA plants don’t stop — cartridges must survive multi-year campaigns.
High-Temperature Gas
150–600 °C across process gas, BF gas and gas-turbine inlet — polymer media degrade.
Strict dP Control
Compressor efficiency and PSA cycle stability depend on low and consistent pressure drop.
No Fiber Shedding
Semiconductor, pharmaceutical and PSA service require zero media migration downstream.
Online Pulse Backwash
All-metal pleated construction tolerates repeated pulse-jet regeneration; polymer cartridges do not.
Application Coverage
14 Typical Compressed Air & Gas Applications — Equipment, Conditions & Recommended Cartridge
From compressor after-treatment and instrument air, to PSA N₂ / O₂ / H₂ plants, LNG natural gas processing, semiconductor ultra-high-purity gas, sterile fermentation air, vacuum service and BF gas cleaning — each application has a distinct combination of purity, temperature, pressure and contaminant profile.
← Scroll horizontally to view all columns →
| Application Equipment | Install Location | Protected Equipment | Working Conditions | Contaminants | Customer Pain Point | Consequence Without Filter | Recommended Cartridge |
|---|---|---|---|---|---|---|---|
| Compressor After-Treatment | Precision filter | Pneumatic equipment | 7–40 bar; continuous | Rust, water droplets, dust | Inconsistent gas quality | Pneumatic equipment damage | 316L Sintered Mesh Pleated |
| Instrument Air System | Precision filter | Control valves, actuators | ISO 8573 compliance | Micro-particles, water mist | Valve malfunction | Automation system faults | High-Precision Sintered Mesh |
| PSA Nitrogen Generator | N₂ outlet filter | Nitrogen system | 5–13 bar | Molecular sieve dust, rust | N₂ purity drop | Off-spec product | 316L Pleated Cartridge |
| PSA Oxygen Generator | O₂ outlet filter | Medical oxygen system | High-purity O₂ | Molecular sieve dust | Oxygen contamination | Safety risk | 316L Electropolished Pleated |
| Hydrogen Generation Equipment | H₂ filter | H₂ compressor | High-purity H₂ service | Metal particles, catalyst powder | Compressor wear | H₂ purity drop | 316L / Hastelloy Pleated |
| LNG Natural Gas Processing | Gas filter | Compressors, valves | −196 °C ~ 80 °C | Rust, droplets, dust | Valve wear | System faults | 316L Sintered Mesh Pleated |
| Natural Gas Regulation Station | Inlet filter | Regulation valves | High-flow gas | Pipeline rust, weld slag | Regulator seizure | Supply disruption | Sintered Mesh Pleated |
| Gas Compressor Inlet | Suction filter | Compressor impeller | High-flow duty | Dust, particulates | Impeller wear | Lower compressor efficiency | High-Capacity Pleated Cartridge |
| Petrochemical Process Gas | Process gas filter | Compressors, catalyst systems | High-temp, high-pressure | Catalyst powder, oxides | Catalyst contamination | Product quality drop | 316L Sintered Mesh Cartridge |
| Semiconductor Gas System | Ultra-high-purity gas filter | Wafer fab equipment | Ultra-clean service | Sub-micron particles | Chip yield decline | Product scrap | Electropolished 316L |
| Sterile Fermentation Air | Sterile air filter | Fermentation tank | SIP / CIP service | Particulates, droplets | Culture contamination | Whole-tank loss | Sanitary-Grade 316L |
| Vacuum System | Vacuum pump inlet filter | Vacuum pumps | Negative pressure duty | Dust, particles | Pump body wear | Lower vacuum level | 316L Pleated Cartridge |
| Steel-Mill BF Gas System | BF gas filter | Fans, compressors | High-dust environment | Coke fines, iron-oxide dust | Fan wear | Shutdown maintenance | 316L Sintered Mesh Cartridge |
| Oxygen Pipeline Network | Pipeline filter | O₂ end equipment | High-purity O₂ service | Rust, particles | Pipeline contamination | Safety hazard | Degreased 316L Pleated |
Operating Conditions
Why Stainless Steel Pleated — Mapped to Gas-Service Conditions
| Condition Type | Working Conditions | Why Stainless Steel Pleated Filter |
|---|---|---|
| Ultra-High-Purity Gas | 99.99 % – 99.9999 % | Prevents particulate contamination of high-purity product. |
| High-Temperature Gas | 150–600 °C | Polymer media fail; metal pleated cartridges remain stable. |
| High-Flow Service | Thousands of Nm³/h | Large filtration area minimizes baseline dP. |
| Online Pulse Backwash | Pulse-jet regeneration | All-metal construction tolerates repeated pulse loading. |
| High-Pressure Gas | 10–300 bar | High mechanical strength of all-metal pleated construction. |
| Corrosive Gas | H₂S, acidic gas | 316L, 904L and Hastelloy material options. |
| Cryogenic Service | LNG, −196 °C | Stainless steel maintains toughness at cryogenic temperatures. |
| Sterile Service | Pharma, fermentation | Tolerates steam sterilization (SIP) and CIP. |
| No Fiber Shedding | Semi, pharma, PSA | Sintered metal construction has zero media migration. |
Customer Concerns
Top 5 Questions from Compressed Air & Gas Customers
1. Pressure drop is too high — what’s the fix?
add
SINFT pleated cartridges provide 3–8× more effective filtration area in the same housing footprint, dramatically reducing baseline dP. The pleated sintered mesh geometry is the standard solution for high-flow gas service at low dP.
2. Our current cartridge life is too short — how does SINFT compare?
add
SINFT cartridges are all-metal construction and can be regenerated by online pulse backwash, ultrasonic or chemical cleaning. Many compressed air and PSA customers achieve multiple cleaning cycles per cartridge, dramatically extending service life.
3. Gas purity drifts over time — how can we stabilize it?
add
Drift is usually caused by media migration or pleat collapse under flow. SINFT sintered mesh construction maintains a stable pore structure across the full service life, delivering consistent micron rating and zero fiber shedding.
4. Cartridges fail in high-temperature gas service — what materials do you offer?
add
SINFT pleated cartridges are all-metal — 316L is rated to ~600 °C continuous service, 310S for higher temperature, and Hastelloy for severe corrosive gas. Polymer or resin-bonded media cannot survive these conditions.
5. Replacement downtime is expensive — can we extend the change-out cycle?
add
Yes — SINFT pleated cartridges support online pulse-jet backwash regeneration. This is the standard practice on PSA N₂/O₂, gas turbine inlet and gas-compressor pre-filtration installations, reducing change-out frequency by an order of magnitude.
Related Products & Applications
Explore Related Solutions
Pleated Filter Cartridges
Back to the full product overview, specs and downloads.
Sintered Mesh Filter
The core media for high-pressure gas service.
Oil & Gas Application
Upstream gas separator, LNG, offshore and pipeline service.
Petrochemical Application
FCC, hydrocracking, ethylene and refinery process gas.
Request a Quote — Compressed Air & Gas Pleated Filtration
Tell us your gas service (compressed air, instrument air, PSA N₂/O₂/H₂, LNG, process gas, semiconductor…), pressure, temperature, flow rate and required purity — our engineering team replies with a tailored cartridge specification within 24 hours.