Sintered Fiber Felt Filters — SINFT Filter SS316L
Sintered fiber felt filter product view 1
Sintered fiber felt filter cartridge product range
Sintered fiber felt filter cartridge size range
Stainless steel sintered fiber felt cartridges
Sintered fiber felt filter product view 4

Sintered Filters — High-Porosity Series

Sintered Fiber Felt Filters

SS316L Stainless Steel — High-Porosity Random Fiber Matrix

SS316L Stainless Steel 0.5–50 µm Up to 600℃ Up to 10 bar High Porosity
Material
SS316L Random Fiber Matrix
Filtration Rating
0.5–50 µm
Operating Temp
Up to 600℃
Max Pressure
Up to 10 bar differential
Filtration Area
High porosity matrix
Length Range
10" / 20" / 30" / 40"
✓ ISO Quality ✓ Passivation Tested ✓ OEM Available

Product Overview

Sintered Fiber Felt Filters for
High-Precision Reusable Filtration

Sintered fiber felt filter cartridges are made from stainless steel fiber felt, with SS316L as the standard material. The finished felt is formed from layers with different pore sizes, creating a gradient porosity structure that can deliver high filtration accuracy and high dirt-holding capacity.

The media has a three-dimensional network, porous structure, high porosity, large surface area and uniform pore-size distribution, allowing continuous filtration across the media surface. These structural characteristics help stainless steel sintered fiber felt compensate for the clogging and damage risks of metal wire mesh, while also overcoming the brittleness and low-flow limitations of powder-sintered media. It is a strong choice for high-temperature, corrosion-resistant and high-precision filtration.

Best for
High dirt-loading filtration, low pressure drop, gas and steam filtration, polymer melt and high-temperature service.
Not ideal for
Rigid surface filtration, aggressive backwash cleaning or low-cost disposable cartridge replacement.
Sintered fiber felt filter cartridge customization options

Technical Specifications

Typical Specifications — Sintered Fiber Felt Filters

Use this section for quick engineering review. Final grade, support mesh, end cap, and seal selection should be confirmed against temperature, gas or liquid type, particle load, cleaning method, and allowable pressure drop.

Core Parameter Range

Filter MediaMaterial OptionsFilter RatingPorosityTemperatureConstructionElement Forms
Random-laid sintered metal fiber feltSS304 / SS316L / FeCrAl / Hastelloy / Inconel / Nickel / Titanium1–60 µm typical; custom grades availableUp to about 85% depending on grade and structureSS fiber felt up to 600℃; FeCrAl for higher-temperature serviceWithout mesh, single protection mesh, or double protection meshCylindrical, pleated, candle, disc, sheet, custom welded assembly
Sintered fiber felt technical specification table

Test Standard Notes

  1. Sintered fiber felt is manufactured according to GB/T 20100-2016 for stainless steel fiber sintered filter felt.
  2. Filtration accuracy and dirt-holding capacity are measured according to GB/T 18853-2002.
  3. Bubble point pressure is measured according to GB/T 5249.
  4. Air permeability is measured according to GB/T 5453, with a 200 Pa pressure difference and air as the test medium.
  5. Tensile strength is measured according to GB/T 228.
Sintered fiber felt surface filtration structure

Surface Filtration Structure

Sintered fiber felt cross-section structure

Cross-Section Structure

Sintered Fiber Felt Media Samples

Sintered fiber felt media sample 6
Sintered fiber felt media sample 5
Sintered fiber felt media sample 4
Sintered fiber felt media sample 3
Sintered fiber felt media sample 2
Sintered fiber felt media sample 1

Testing Equipment

Testing Equipment & Inspection

Air permeability, bubble point and final inspection records help verify pore stability, flow consistency and release quality before shipment.

Sintered fiber felt air permeability test equipment

Air Permeability Test

Sintered fiber felt bubble point test equipment

Bubble Point Test

Sintered fiber felt quality inspection equipment

Quality Inspection

Component Details

Built to Address Customer Concerns

End caps, center tube support and welded construction are designed to improve sealing reliability, flow stability and long-term structural strength.

settings_input_component

End Caps

  • Stainless steel end caps provide better structural stability under high differential pressure.
  • Welded construction instead of adhesive bonding helps minimize bypass leakage and maintain stable filtration performance.
density_medium

Center Tube

  • High open-area support tube helps reduce system pressure drop and improve flow efficiency.
  • Stable high-flow operation is supported by an optimized structure designed for long-term hydraulic system service.
precision_manufacturing

Welding Process

  • Suitable for high-temperature and high-pressure service because welded construction performs better in continuous operating conditions.
  • Lower structural failure risk is supported by precision welding during long-term operation.

Performance & Comparison

Advantages & Trade-offs — Why Choose Fiber Felt

Sintered fiber felt filter advantages and trade-offs comparison

Application Coverage

Application Fields — Where Sintered Fiber Felt Filters Are Used

New Energy

High-temperature gas, catalyst, battery material and cleanable process filtration for new energy manufacturing.

Marine & Offshore

Corrosion-resistant metal fiber filtration for marine fuel, hydraulic, exhaust gas and offshore process systems.

Steel & Metallurgy

Hot gas, furnace atmosphere, rolling oil and high-temperature particulate filtration for metal processing.

Food & Beverage

Reusable stainless steel depth filtration for steam, edible liquids, process gas and equipment protection.

Pharmaceutical

Powder recovery, process gas cleaning, steam filtration and cleanable metal media for pharmaceutical production.

Polymer Melt

PE, PET, PP, PA, PBT, PC, film, sheet, resin and gel-containing polymer melt filtration.

Petrochemical

Chemical vapors, solvents, catalyst retention, hot gas and corrosive process fluid filtration.

Technical Support

Frequently Asked Questions — Sintered Fiber Felt Filters

What is a sintered fiber felt filter?

add

A sintered fiber felt filter is a stainless steel depth-filtration element made from random-laid metal fibers. The high-porosity fiber matrix captures particles through the media depth and is commonly used for gas, steam, polymer melt and high dirt-loading liquid filtration.

When should I choose fiber felt instead of sintered mesh?

add

Choose sintered fiber felt when high dirt-holding capacity, low pressure drop and depth filtration are more important. Choose sintered mesh when rigid surface filtration, strong backwash cleaning and stable pore geometry are the main requirements.

What information is needed for a custom sintered fiber felt filter?

add

Please provide micron rating, material, length, diameter, end connection, seal material, flow rate, working fluid, operating temperature, pressure drop, cleaning method and photos or drawings of the existing filter element.

Request a Quote for Sintered Fiber Felt Filters

Provide your specifications and our team will respond with a detailed quote within 24 hours.

PDF, DWG, STEP, JPG, PNG · Max 10MB per file
Response within 24 hours · Technical drawings welcome · No minimum for samples