
SINFT Filter Blog
Guides, know-how, and fundamentals — written by engineers for engineers working with stainless steel filters and custom filtration solutions.

Compare industrial filter element types by construction, media, filtration behavior, cleaning method, application and RFQ requirements.

Learn how to review a filter element material certificate, verify grade and heat traceability, compare EN 10204 types, and write clearer RFQ requirements.

Compare filter element testing methods for materials, dimensions, pore integrity, permeability and pressure strength, then build a practical RFQ test plan.

Learn the sintered filter working principle, compare mesh, fiber felt and powder media, and identify the data needed for an industrial filter RFQ.

Learn how to clean a wedge wire filter by matching backwash, brushing, ultrasonic or chemical methods to the foulant, then verify recovery before reuse.

Learn which replacement strainer basket dimensions control housing fit, sealing and removal, plus the drawing and RFQ details a supplier needs.

Learn when stainless steel filter element passivation matters, what it cannot fix, and what surface treatment data to include in an RFQ.

Learn when sintered mesh filter cleaning works, which methods fit different fouling types, and when replacement is safer.

Learn what a filter element air permeability test means, how it differs from pressure drop and micron rating, and what RFQ data to send.

Learn how filter element collapse pressure rating differs from pressure drop, burst testing, bypass setting and RFQ inspection data.
Quick answers to the questions we get most from engineers and procurement teams.
Sintered mesh filters are made from multiple layers of stainless steel wire mesh sintered together, offering high strength and temperatures up to 400°C. Pleated filter cartridges use pleated media to increase surface area, ideal for higher flow rates with lower pressure drops. Choose sintered mesh for high-pressure and high-temperature applications; pleated cartridges for general industrial filtration.
25–100 μm for coarse pre-filtration, 5–25 μm for fine filtration, 1–5 μm for precision polishing. Provide your application details (media type, flow rate, pressure conditions) and our team will recommend the appropriate rating.
Yes. Backwash with compressed air or compatible liquid. Avoid harsh chemicals that damage seal materials. Inspect the media after each cleaning cycle. Replace if any deformation, media thinning, or seal wear is detected.
Passivation removes free iron from the stainless steel surface via electrochemical treatment, improving corrosion resistance. Every SINFT Filter filter undergoes passivation testing before shipping — verified with up to 200 tests per kit.
Initial samples typically delivered within 48–72 hours after drawing confirmation. Prototype quantities as low as 1–5 pieces accepted. Share your technical drawings via email and our team will confirm the timeline.